Aprilia Shop   |   Moto Guzzi Shop   |   RWN Moto   |   Kriega Shop   |   RWN Moto News

Mounting Kit to mount rims on ABS models for Vespa, rear

€29.00 *

Prices incl. VAT plus shipping costs

Delivery time 2-4 Workdays

  • MV000617
for Vespa GTS/​GTS Super/​GTV 125-300ccm ('14-)   With the ABS models... more
Product information "Mounting Kit to mount rims on ABS models for Vespa, rear"
for Vespa GTS/​GTS Super/​GTV 125-300ccm ('14-)
 
With the ABS models changing the rear rim to an aftermarket one has always been a problem. Often these were issues with the tone wheel. Our bolt-kit SIP does away with that. Fitting the rims of the non-ABS models, such as SIP, ZELINI, or even PIAGGIO now is a breeze. The ABS tone wheel can be fitted to the special internally threaded tyre nuts. Occasionally the ABS sensor may rub on the tone wheel. We include two M5 washers to fit to the bolt between ABS sensor and swingarm to remedy that.
  • Consists of PIAGGIO screws.
Mounting information:
  • Fit rim with 5 new rim bolts (bolts with hexagonal head, internal thread) and 5 M8 washers.
  • Fit the ABS tone wheel to the internal thread of the rim nuts, using the five M5 torx bolts and the five M5 wave washers.
  • Refit the swingarm
  • The distance between the ABS sensor and the tone wheel should be 0.4mm min. If the distance is smaller than that, or if the tone wheel rubs on the sensor, use one or even two of the washers on the bolt that secures the sensor between the swingarm and the sensor to adjust the distance. ATTENTION: The distance between sensor and tone wheel should not be too large, if it is there may be no signal at all.
Read, write and discuss reviews... more
Customer evaluation for "Mounting Kit to mount rims on ABS models for Vespa, rear"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Vespa VJ Fluo Helmet red fluorescent Vespa VJ Fluo Helmet red fluorescent
From €226.90 * €248.26 *
Viewed